3D Printed - SAAB 96 V4 & 2 Stroke Tail Light Lens SET 8835449 8835431 Trim
Up for sale is one set (one left, one right) reproduction Saab 96 V4 and 2 stroke tail light lens set. Original lenses are no longer available. These are NEW, 3D PRINTED, FUNCTIONAL REPRODUCTIONS. I have created, and own the cad used to manufacture these lenses. They are not currently available anywhere else. Slight price increase to reflect increased cost of EPDM rubber trim.
Printed in the USA from PETG transparent tinted plastic.
2 x 303 stainless light shield made in USA
2 x UV rated EPDM foam trim
4 x ZPAS phillips replacement screws that match stock thread
Terms
This item is made to order. Allow 1 week for production. eBay will not allow a handling time of more than 3 days. These will not ship in 3 days.
They are not dimensionally exact replicas. To easily print these and offer them for sale, some simplifications have been made to the geometry. Please see photos 4, 5 and 6 and study them carefully before purchasing.
These have been tested with incandescent bulbs of the original wattage for extended periods of time. Installation of impropper size or wattage bulb will melt this lens, just as it would melt a stock lens.
The colors are not exact matches, please see comparison photo 3. The lens is semi-transparent, not optically clear as stock. Photo 4 shows the brightness you can expect with stock, original equipment incandescent bulbs.
Photos 7 and 8 show the some of the detail in the print that may not be visible in the photos. The retroreflective bubbles and lines running down the side of the lens have been reproduced as best as possible within the limitations of the 3D printer.
These are printed on a hobby/home grade machine. There are imperfections. There are no partial refunds because you are unhappy with imperfections. If you require detailed photos of the exact set you will receive, message ahead of time. Refunds will only be issued for undamaged returned lenses, no partial refunds PERIOD.
The lenses are printed in two pieces of different colors and joined with CA glue.
This item is provided through Schimmel Engineering LLC. This product is recommended for static display only, and is not DOT approved.
If you have any additional questions or concerns, please message directly BEFORE purchase.
Up for sale is one set (one left, one right) reproduction Saab 96 V4 and 2 stroke tail light lens set. Original lenses are no longer available. These are NEW, 3D PRINTED, FUNCTIONAL REPRODUCTIONS. I have created, and own the cad used to manufacture these lenses. They are not currently available anywhere else. Slight price increase to reflect increased cost of EPDM rubber trim.
Printed in the USA from PETG transparent tinted plastic.
2 x 303 stainless light shield made in USA
2 x UV rated EPDM foam trim
4 x ZPAS phillips replacement screws that match stock thread
Terms
This item is made to order. Allow 1 week for production. eBay will not allow a handling time of more than 3 days. These will not ship in 3 days.
They are not dimensionally exact replicas. To easily print these and offer them for sale, some simplifications have been made to the geometry. Please see photos 4, 5 and 6 and study them carefully before purchasing.
These have been tested with incandescent bulbs of the original wattage for extended periods of time. Installation of impropper size or wattage bulb will melt this lens, just as it would melt a stock lens.
The colors are not exact matches, please see comparison photo 3. The lens is semi-transparent, not optically clear as stock. Photo 4 shows the brightness you can expect with stock, original equipment incandescent bulbs.
Photos 7 and 8 show the some of the detail in the print that may not be visible in the photos. The retroreflective bubbles and lines running down the side of the lens have been reproduced as best as possible within the limitations of the 3D printer.
These are printed on a hobby/home grade machine. There are imperfections. There are no partial refunds because you are unhappy with imperfections. If you require detailed photos of the exact set you will receive, message ahead of time. Refunds will only be issued for undamaged returned lenses, no partial refunds PERIOD.
The lenses are printed in two pieces of different colors and joined with CA glue.
This item is provided through Schimmel Engineering LLC. This product is recommended for static display only, and is not DOT approved.
If you have any additional questions or concerns, please message directly BEFORE purchase.
Up for sale is one set (one left, one right) reproduction Saab 96 V4 and 2 stroke tail light lens set. Original lenses are no longer available. These are NEW, 3D PRINTED, FUNCTIONAL REPRODUCTIONS. I have created, and own the cad used to manufacture these lenses. They are not currently available anywhere else. Slight price increase to reflect increased cost of EPDM rubber trim.
Printed in the USA from PETG transparent tinted plastic.
2 x 303 stainless light shield made in USA
2 x UV rated EPDM foam trim
4 x ZPAS phillips replacement screws that match stock thread
Terms
This item is made to order. Allow 1 week for production. eBay will not allow a handling time of more than 3 days. These will not ship in 3 days.
They are not dimensionally exact replicas. To easily print these and offer them for sale, some simplifications have been made to the geometry. Please see photos 4, 5 and 6 and study them carefully before purchasing.
These have been tested with incandescent bulbs of the original wattage for extended periods of time. Installation of impropper size or wattage bulb will melt this lens, just as it would melt a stock lens.
The colors are not exact matches, please see comparison photo 3. The lens is semi-transparent, not optically clear as stock. Photo 4 shows the brightness you can expect with stock, original equipment incandescent bulbs.
Photos 7 and 8 show the some of the detail in the print that may not be visible in the photos. The retroreflective bubbles and lines running down the side of the lens have been reproduced as best as possible within the limitations of the 3D printer.
These are printed on a hobby/home grade machine. There are imperfections. There are no partial refunds because you are unhappy with imperfections. If you require detailed photos of the exact set you will receive, message ahead of time. Refunds will only be issued for undamaged returned lenses, no partial refunds PERIOD.
The lenses are printed in two pieces of different colors and joined with CA glue.
This item is provided through Schimmel Engineering LLC. This product is recommended for static display only, and is not DOT approved.
If you have any additional questions or concerns, please message directly BEFORE purchase.
