NEW 3D Printed - 14' Seadoo Challenger Speedster Sportster Rope Box Hatch 269700030
This part has ridges in it from the printing process. it can be filled, sanded and gel coated for a factory equivalent finish by you. I do not offer these gel coated. The part is ready to use as shipped, is ultraviolet and fuel stable. each cover will have different imperfections due to the printing process. There are no partial refunds. if you require a photo of the exact copy you will receive, message ahead of time.
Up for sale is a *NEW* 3D printed rope box cover for all 14.5ft Seadoo jet boats - speedster, sportster and challenger. Designed and manufactured in Nashville, TN, United States. This is a complete kit that includes all parts to install a hatch to your boat, some tools required (see below). This part is easy to install. Thoroughly lake and river tested in 2023 (including time around, and use by children).
This cover, like the original, should not be stepped on while traversing the engine hatch to the rear deck.
Tools required for installation:
Electric Hand Drill
1/4in drill bit (to remove old plastic hinge halves)
1/8in drill bit (for through bolted new fasteners)
No.1 Phillips Screw Driver
1/4in open ended wrench
Auction includes:
Brand new 3D printed hatch cover
Brand new latch
Stainless Steel Piano Hinge (no more plastic hinges)
Stainless Steel Hardware for Installation
Stainless tether to prevent over opening
EPDM Foam Trim for Hatch Seal
Drill Template for new stainless fasteners (no rivets)
Installation Instructions
Fits the following models:
1996 Sea Doo Challenger, 5896
1996 Sea Doo Challenger, 5899
1997 Sea Doo Challenger, 5603/5606
1997 Sea Doo Speedster, 5602/5608
1998 Sea Doo Challenger, 5612
2000 Sea Doo Challenger, 5672
I also offer the cooler lid cover, buy both and save on shipping! You can find it here.
This part has ridges in it from the printing process. it can be filled, sanded and gel coated for a factory equivalent finish by you. I do not offer these gel coated. The part is ready to use as shipped, is ultraviolet and fuel stable. each cover will have different imperfections due to the printing process. There are no partial refunds. if you require a photo of the exact copy you will receive, message ahead of time.
Up for sale is a *NEW* 3D printed rope box cover for all 14.5ft Seadoo jet boats - speedster, sportster and challenger. Designed and manufactured in Nashville, TN, United States. This is a complete kit that includes all parts to install a hatch to your boat, some tools required (see below). This part is easy to install. Thoroughly lake and river tested in 2023 (including time around, and use by children).
This cover, like the original, should not be stepped on while traversing the engine hatch to the rear deck.
Tools required for installation:
Electric Hand Drill
1/4in drill bit (to remove old plastic hinge halves)
1/8in drill bit (for through bolted new fasteners)
No.1 Phillips Screw Driver
1/4in open ended wrench
Auction includes:
Brand new 3D printed hatch cover
Brand new latch
Stainless Steel Piano Hinge (no more plastic hinges)
Stainless Steel Hardware for Installation
Stainless tether to prevent over opening
EPDM Foam Trim for Hatch Seal
Drill Template for new stainless fasteners (no rivets)
Installation Instructions
Fits the following models:
1996 Sea Doo Challenger, 5896
1996 Sea Doo Challenger, 5899
1997 Sea Doo Challenger, 5603/5606
1997 Sea Doo Speedster, 5602/5608
1998 Sea Doo Challenger, 5612
2000 Sea Doo Challenger, 5672
I also offer the cooler lid cover, buy both and save on shipping! You can find it here.
This part has ridges in it from the printing process. it can be filled, sanded and gel coated for a factory equivalent finish by you. I do not offer these gel coated. The part is ready to use as shipped, is ultraviolet and fuel stable. each cover will have different imperfections due to the printing process. There are no partial refunds. if you require a photo of the exact copy you will receive, message ahead of time.
Up for sale is a *NEW* 3D printed rope box cover for all 14.5ft Seadoo jet boats - speedster, sportster and challenger. Designed and manufactured in Nashville, TN, United States. This is a complete kit that includes all parts to install a hatch to your boat, some tools required (see below). This part is easy to install. Thoroughly lake and river tested in 2023 (including time around, and use by children).
This cover, like the original, should not be stepped on while traversing the engine hatch to the rear deck.
Tools required for installation:
Electric Hand Drill
1/4in drill bit (to remove old plastic hinge halves)
1/8in drill bit (for through bolted new fasteners)
No.1 Phillips Screw Driver
1/4in open ended wrench
Auction includes:
Brand new 3D printed hatch cover
Brand new latch
Stainless Steel Piano Hinge (no more plastic hinges)
Stainless Steel Hardware for Installation
Stainless tether to prevent over opening
EPDM Foam Trim for Hatch Seal
Drill Template for new stainless fasteners (no rivets)
Installation Instructions
Fits the following models:
1996 Sea Doo Challenger, 5896
1996 Sea Doo Challenger, 5899
1997 Sea Doo Challenger, 5603/5606
1997 Sea Doo Speedster, 5602/5608
1998 Sea Doo Challenger, 5612
2000 Sea Doo Challenger, 5672
I also offer the cooler lid cover, buy both and save on shipping! You can find it here.
