Skip to Content
Home
Scanning
Products
Meet
Portfolio
Case Studies
Contact
Laser Scanning & Reverse Engineering in Nashville, Tennessee
Laser Scanning & Reverse Engineering in Nashville, Tennessee
0
0
Home
Scanning
Products
Meet
Portfolio
Case Studies
Contact
Laser Scanning & Reverse Engineering in Nashville, Tennessee
Laser Scanning & Reverse Engineering in Nashville, Tennessee
0
0
Home
Scanning
Products
Meet
Portfolio
Case Studies
Contact
Products ZA70 R1 in Black Anodize - Complete Running Built Engine 60mph
PXL_20250117_015319140.jpg Image 1 of 2
PXL_20250117_015319140.jpg
PXL_20250117_014158982.jpg Image 2 of 2
PXL_20250117_014158982.jpg
PXL_20250117_015319140.jpg
PXL_20250117_014158982.jpg

ZA70 R1 in Black Anodize - Complete Running Built Engine 60mph

$2,700.00

Up for sale is a complete, built ZA70 R1 from Schimmel Engineering. Just add fuel line and rolling frame. Exhaust is fabricated to bolt right up to Magnum or Murray frames. Maxi and pinto will require slight modifications to exhaust mounting tab. Ignition, exhaust and tuned carb are installed. This engine runs low 60’s at ~320F head temps. This engine was pulled running.

The engine is built as follows:

  • ZA70 R1 Billet case in black anodize

  • Rebuilt small end needle roller ZA50 Stock Crankshaft (rito rod)

  • Gila 47mm Cylinder (stock)

  • Dio intake

  • Moto Tassinari Vforce V364a reed block

  • Botanas CDI from DOS

  • 22t sprocket

  • Proma Circuit from DOS reinforced header and stinger

  • OKO 21mm Carb

  • Foam Airfilter

  • Stock Clutches with 15w-40 rotella fill (drained before shipping)

Ride along video: https://www.youtube.com/watch?v=SPQGcMidga0&ab_channel=SchimmelEngineering

Documentation package: https://drive.google.com/drive/u/0/folders/1ujRtiFXNZBDY7EjWQYI0efhWnQRhCNHz

Schimmel Engineering does not build engines for hire, so this is a rare opportunity to own an engine built by the designer. 1 of only 5 in all black billet.

International customers - a $40 placeholder charge for shipping is added. You will be invoiced separately for actual shipping. USA residents, shipping charges are actual and no additional shipping fee is required.

This is a performance engine, and as such, does not come with any warranty expressed or implied. The engine is ONLY guaranteed not to be dead on arrival. No known issues at the time of sale.

Add To Cart

Up for sale is a complete, built ZA70 R1 from Schimmel Engineering. Just add fuel line and rolling frame. Exhaust is fabricated to bolt right up to Magnum or Murray frames. Maxi and pinto will require slight modifications to exhaust mounting tab. Ignition, exhaust and tuned carb are installed. This engine runs low 60’s at ~320F head temps. This engine was pulled running.

The engine is built as follows:

  • ZA70 R1 Billet case in black anodize

  • Rebuilt small end needle roller ZA50 Stock Crankshaft (rito rod)

  • Gila 47mm Cylinder (stock)

  • Dio intake

  • Moto Tassinari Vforce V364a reed block

  • Botanas CDI from DOS

  • 22t sprocket

  • Proma Circuit from DOS reinforced header and stinger

  • OKO 21mm Carb

  • Foam Airfilter

  • Stock Clutches with 15w-40 rotella fill (drained before shipping)

Ride along video: https://www.youtube.com/watch?v=SPQGcMidga0&ab_channel=SchimmelEngineering

Documentation package: https://drive.google.com/drive/u/0/folders/1ujRtiFXNZBDY7EjWQYI0efhWnQRhCNHz

Schimmel Engineering does not build engines for hire, so this is a rare opportunity to own an engine built by the designer. 1 of only 5 in all black billet.

International customers - a $40 placeholder charge for shipping is added. You will be invoiced separately for actual shipping. USA residents, shipping charges are actual and no additional shipping fee is required.

This is a performance engine, and as such, does not come with any warranty expressed or implied. The engine is ONLY guaranteed not to be dead on arrival. No known issues at the time of sale.

Up for sale is a complete, built ZA70 R1 from Schimmel Engineering. Just add fuel line and rolling frame. Exhaust is fabricated to bolt right up to Magnum or Murray frames. Maxi and pinto will require slight modifications to exhaust mounting tab. Ignition, exhaust and tuned carb are installed. This engine runs low 60’s at ~320F head temps. This engine was pulled running.

The engine is built as follows:

  • ZA70 R1 Billet case in black anodize

  • Rebuilt small end needle roller ZA50 Stock Crankshaft (rito rod)

  • Gila 47mm Cylinder (stock)

  • Dio intake

  • Moto Tassinari Vforce V364a reed block

  • Botanas CDI from DOS

  • 22t sprocket

  • Proma Circuit from DOS reinforced header and stinger

  • OKO 21mm Carb

  • Foam Airfilter

  • Stock Clutches with 15w-40 rotella fill (drained before shipping)

Ride along video: https://www.youtube.com/watch?v=SPQGcMidga0&ab_channel=SchimmelEngineering

Documentation package: https://drive.google.com/drive/u/0/folders/1ujRtiFXNZBDY7EjWQYI0efhWnQRhCNHz

Schimmel Engineering does not build engines for hire, so this is a rare opportunity to own an engine built by the designer. 1 of only 5 in all black billet.

International customers - a $40 placeholder charge for shipping is added. You will be invoiced separately for actual shipping. USA residents, shipping charges are actual and no additional shipping fee is required.

This is a performance engine, and as such, does not come with any warranty expressed or implied. The engine is ONLY guaranteed not to be dead on arrival. No known issues at the time of sale.

You Might Also Like

Sachs Eagle G3 Side Covers Untitled+Project+%284%29_Camera_Default+Camera+3.jpg
Sachs Eagle G3 Side Covers
$119.69
deadped-minarelli-v1-108-fan-2.jpg deadped-minarelli-v1-108-fan-2.jpg deadped-minarelli-v1-108-fan-2.jpg
Minarelli V1 6061-T6 Black Anodized Billet Cooling Fan for 108
$98.99
Sold Out
za703.JPG za703.JPG za703.JPG
ZA70 R2 Billet Engine Case
$1,199.00
Side Cover Quarter Turn Return
Side Cover Quarter Turn Return
$7.99
TEXT.PXL_20240305_164737974.jpg TEXT.PXL_20240305_164737974.jpg TEXT.PXL_20240305_164737974.jpg TEXT.PXL_20240305_164737974.jpg
Puch ZA50 Transmission Seal Protector Factory Tool 905.6.31.108.1
$19.78