1966 Plymouth Barracuda Valiant Tail Light Lens Set LH/RH
1966 Plymouth Valiant/Barracuda - Tail Lamp Lens SET! All lenses for left and right tail light. 3D printed in the USA from PETG UV and petroleum stable plastic. The lenses feature brass heat M3 heat set metric inserts, with metric machine screws. No more self tapping screws that break cast lenses.
These are offered as an affordable alternative to spending what I can offer the whole set for in a single cast lens. You will accept the below terms by replying to an ebay message. If you want optically clear lenses, go buy the resin ones for $$$$$.
These are printed from high resolution 3D scans of the original lenses, and printed on a hobby grade printer in a home shop.
I have other lenses in PETG I use that have been tested with incandescent bulbs of the original wattage for extended periods of time. Installation of improper size or wattage bulb will melt this lens, just as it would melt a stock lens.
The colors are not exact matches, if you want an exact match, other sellers have exact replicas.
The retroreflective bubbles and lines running down the side of the lens have been reproduced as best as possible within the limitations of the 3D printer. What you see is what you get.
These are printed on a hobby/home grade machine. There are imperfections. There are no partial refunds because you are unhappy with imperfections. If you require detailed photos of the exact set you will receive, message ahead of time. Refunds will only be issued for undamaged returned lenses, no partial refunds PERIOD. You pay all shipping for returns.
This item is provided through Schimmel Engineering LLC. This product is only designed for static display only, and is not DOT approved.
If you have any additional questions or concerns, please message directly BEFORE purchase.
I have the ability to scan and reproduce almost anything at any quality. The only limitation is your budget. These are offered as an affordable alternative to spending almost $400 on cast replicas, which do not offer matching center lenses.
I can reproduce anything, draw anything in CAD, and do anything you want if your pockets are deep enough. Shoot me a message if you have a project.
1966 Plymouth Valiant/Barracuda - Tail Lamp Lens SET! All lenses for left and right tail light. 3D printed in the USA from PETG UV and petroleum stable plastic. The lenses feature brass heat M3 heat set metric inserts, with metric machine screws. No more self tapping screws that break cast lenses.
These are offered as an affordable alternative to spending what I can offer the whole set for in a single cast lens. You will accept the below terms by replying to an ebay message. If you want optically clear lenses, go buy the resin ones for $$$$$.
These are printed from high resolution 3D scans of the original lenses, and printed on a hobby grade printer in a home shop.
I have other lenses in PETG I use that have been tested with incandescent bulbs of the original wattage for extended periods of time. Installation of improper size or wattage bulb will melt this lens, just as it would melt a stock lens.
The colors are not exact matches, if you want an exact match, other sellers have exact replicas.
The retroreflective bubbles and lines running down the side of the lens have been reproduced as best as possible within the limitations of the 3D printer. What you see is what you get.
These are printed on a hobby/home grade machine. There are imperfections. There are no partial refunds because you are unhappy with imperfections. If you require detailed photos of the exact set you will receive, message ahead of time. Refunds will only be issued for undamaged returned lenses, no partial refunds PERIOD. You pay all shipping for returns.
This item is provided through Schimmel Engineering LLC. This product is only designed for static display only, and is not DOT approved.
If you have any additional questions or concerns, please message directly BEFORE purchase.
I have the ability to scan and reproduce almost anything at any quality. The only limitation is your budget. These are offered as an affordable alternative to spending almost $400 on cast replicas, which do not offer matching center lenses.
I can reproduce anything, draw anything in CAD, and do anything you want if your pockets are deep enough. Shoot me a message if you have a project.
1966 Plymouth Valiant/Barracuda - Tail Lamp Lens SET! All lenses for left and right tail light. 3D printed in the USA from PETG UV and petroleum stable plastic. The lenses feature brass heat M3 heat set metric inserts, with metric machine screws. No more self tapping screws that break cast lenses.
These are offered as an affordable alternative to spending what I can offer the whole set for in a single cast lens. You will accept the below terms by replying to an ebay message. If you want optically clear lenses, go buy the resin ones for $$$$$.
These are printed from high resolution 3D scans of the original lenses, and printed on a hobby grade printer in a home shop.
I have other lenses in PETG I use that have been tested with incandescent bulbs of the original wattage for extended periods of time. Installation of improper size or wattage bulb will melt this lens, just as it would melt a stock lens.
The colors are not exact matches, if you want an exact match, other sellers have exact replicas.
The retroreflective bubbles and lines running down the side of the lens have been reproduced as best as possible within the limitations of the 3D printer. What you see is what you get.
These are printed on a hobby/home grade machine. There are imperfections. There are no partial refunds because you are unhappy with imperfections. If you require detailed photos of the exact set you will receive, message ahead of time. Refunds will only be issued for undamaged returned lenses, no partial refunds PERIOD. You pay all shipping for returns.
This item is provided through Schimmel Engineering LLC. This product is only designed for static display only, and is not DOT approved.
If you have any additional questions or concerns, please message directly BEFORE purchase.
I have the ability to scan and reproduce almost anything at any quality. The only limitation is your budget. These are offered as an affordable alternative to spending almost $400 on cast replicas, which do not offer matching center lenses.
I can reproduce anything, draw anything in CAD, and do anything you want if your pockets are deep enough. Shoot me a message if you have a project.
